Globe Core Transformer Oil Purification Plant CMM 0.6
GlobeCore Transformer Oil Purification Plant CMM 0.6 Voltage 380/220, 50 Hz Power 18 kW Dimension(L*W*H) 1400/700/1700 Weight 400 kg Certification CE ♦ Removes Water from 100 ppm down to 10 ppm in a single pass and down to 5 ppm after 3 passes (ASTM method D-1533) ♦ Removes Particulate Matter to 5 microns as standard or down to 0.3 micron (optional) ♦ Improves dielectric strength up to 65 kV CMM 0.6 - is designed for removal of free and dissolved water and mechanical contaminants from insulating, turbine, compressor and lubricating oils. Compact design provides excellent mobility with effective flow rate of 600 l/h. Available in trolley or roadworthy trailer mounted, semi-automated, fully automated (PLC controlled) and explosion proof versions. Optional equipment includes moisture probes, flowmeter with totalizer and 1 micron fine oil filter. Purification is "a process that eliminates or reduces physical contamination by means of physical processes (filtration, de-humidification, de-gasification, etc.)".3 Typically this means a combination of mechanical filtration and vacuum degassing. It can be done both off-line and on-line. The effect is normally an efficient removal of particles larger than 0.3 micron and removal of most of the dissolved water and gases in the oil. This is usually sufficient to correct a low electrical breakdown voltage, caused by a combination of particles and high water content, which is a fairly common condition. For more details please contact: Mr David Gibb, Phone: +44 (0)1424 205140, E-Mail: sales@drallim.com, www.drallim.com or Mr Stanislav Sukhar via skype: stan_globecore or by phone:+380500131317; +38 (05322) 41211 E-Mail: sales@gcequipment.com www.gcequipment.com