GlobeCore Transformer Oil Purification Plant CMM 0.16
GlobeCore Transformer Oil Purification Plant CMM 0.16 ♦ Removes Water from 100 ppm down to 10 ppm in a single pass and down to 5 ppm after 3 passes (ASTM ) method D-1533) ♦ Removes Particulate Matter to 5 microns as standard or down to 0.3 micron (optional) ♦ Improves dielectric strength up to 65 kV Voltage 380/220, 50 Hz Power 6 kW Dimension(L*W*H) 980/650/1550 Weight 230 kg Certification CE GlobeCore CMM 0.16 - the most compact in the range of GlobeCore Oil Purification Plants is designed for removal of free and dissolved water and mechanical contaminants from insulating, turbine, compressor and lubricating oils. It is ideally suited for servicing of transformers and other electrical equipment installed in basements, mines and other places with restricted access. CMM 0.16 is available in semi-automated, automated (PLC controlled) and explosion proof versions. Optional equipment includes moisture probe, flowmeter with totalizer and 0.3 micron fine filter. Purification is "a process that eliminates or reduces physical contamination by means of physical processes (filtration, de-humidification, de-gasification, etc.)". Typically this means a combination of mechanical filtration and vacuum degassing. It can be done both off-line and on-line. The effect is normally an efficient removal of particles larger than 0.3 micron and removal of most of the dissolved water and gases in the oil. This is usually sufficient to correct a low electrical breakdown voltage, caused by a combination of particles and high water content, which is a fairly common condition. GlobeCore offers a range of Oil Purification Plants and High Vacuum Dregasifiers with various flow rates from 160 l/h to 10000 l/h. For more details please contact mr Stanislav Sukhar via skype: stan_globecore or by phone:+380500131317; +38 (05322) 41211 or email: sales@gcequipment.com www.gcequipment.com or Mr David Gibb - Phone+44 (0)1424 205140, sales@drallim.com www.drallim.com