DA0115RC - linear motion guide with recirculating ball carriage
Accuride's new linear motion guide - the DA0115RC, an aluminium track with recirculating ball carriage, has been designed for areas where precision linear slides may be over engineered for the job and therefore expensive. Aimed at cost-sensitive applications involving any length of travel and designs where space constraints must be considered, this linear motion slide offers up to 120kg load rating, depending on the orientation and number of ball carriages used. Accuride's linear slide offers the user complete flexibility and simplicity. The aluminium track comes in 2 lengths; 1.2 and 2.4m, which can be cut to the required length and fixing holes drilled as needed. The ball carriages and end stops are sold separately so that the end user can use as many as necessary for their particular application. An infinite length of track is achieved by butting the tracks together, supplying linear motion that is limited only by the length of the rail. For added stability the track ends can be pinned together. This linear system has a number of features to make installation very easy. The tracks have drilling marks for both the fixing holes and for the end stops. Also a drilling jig can be bought separately to allow the accurate and permanent pinning together of tracks. The slide has been tested in Accuride's UK laboratory where the track was fixed in different orientations and fitted with 1, 2 or 3 ball carriages to gauge the load capacity. Tested over 50,000 metres at speeds of xxxx, this linear motion slide has proved to be exceptionally robust with loads of between 30 and 120kg. Although not suitable for high torque applications, the DA0115RC can be used horizontally or vertically and is suitable for industrial automation, sliding doors, movable screens and safety guards or control panels.