TyrePal TA22x Remote Wireless Tyre Pressure Monitoring System
Monitors your tyres and warns you if things go wrong Monitor tyre pressures – even while you drive… TyrePal continuously monitors the pressure and temperature of your tyres – and warns you when things aren’t right. Things like: Low pressure that causes excessive tyre wear and fuel consumption High pressure that affects road holding, braking distance and tyre wear Overheating – a potential blowout The new TyrePal system makes it easy to monitor tyre pressures with a display at your driving position. The system uses valve-cap sensors to transmit accurate pressure and temperature data from your tyres. The system continuously displays pressure for each tyre and gives a leak alarm and alerts for low pressure. For performance users, tyre temperature can be displayed by pushing a button, and there are high pressure and high temperature alerts. Alert thresholds are all adjustable from the default settings. Installation is quick and easy. Just screw the sensors onto the tyres in place of standard valve caps and fit the anti-theft collars if required. Position the monitor on the bracket in view of the driver and the job’s done. There’s no need to remove the tyres, no programming and generally no need to even rebalance the wheels. No wiring is required. Power for the monitor can be from internal batteries that last about six months or from the vehicle’s 12V power supply with the plug-in connector provided. Lithium batteries in the valve-cap sensors last 1 to 2 years and are replaceable. Pressure can be displayed in psi, bar or KPa, with an accuracy ±1psi. Maximum pressure is 60psi, suitable for most cars, with a high pressure version also available. Temperature in °C or °F is accurate to 2°C The system only alerts you when there’s a problem. The display defaults to just an outline of the vehicles and the wheel positions being monitored, but lights up and displays relevant information in the event of an alert. A push button enables you to scroll through the wheels to display the actual pressures and temperatures. Automatic battery saving technology shuts down the system (both monitor and sensors) when the vehicle is stationary. Add additional sensors up to a maximum of 22 Alert levels are set automatically from target pressures input by the user for each individual wheel and multiple levels of audible and visible alert are provided, depending on the severity of abnormality. Rapid air loss (Blow-out) Semi-rapid air loss (puncture etc.) Pressure 15% low Pressure 25% low Pressure 50% low Pressure 20% above target Temperature above 75°C Temperature above 85°C Display includes diagnostic icons and red/green LED status indicator. Pressure can be displayed in psi, bar or Kpa. Temperature can be ˚C or ˚F. A clear battery warning is shown if batteries are low in either the monitor or sensors. - See more at: https://www.secureleisurestorage.co.uk/product/safety-products/tyrepal-ta22x/#sthash.bx7quAoV.dpuf