Automotive Detailing
16 stage two-bucket wash using foam lance and lambs wool wash mittsAll shuts to be thoroughly cleaned, including any excess grease wiped awayWheels cleaned, front, back and inside, with gentle non acidic wheel cleaner *Wheels Removed *Suspension and running gear degreasedCalipers and hubs cleaned and sealedWheel arches cleaned by hand and coated with 505 protectantEngine bay to be soaked in G101 cleanerAll parts of the engine bay to be worked over with various brushes and equipmentWith the car elevated, the underside is cleaned throughoutIf requested, metal items to be polished underneath the carOnce complete the car is rinsed and soaked in lubricate detailer for the following processAll surfaces to have decontamination with Sonus/Poly clay, to remove bonded contaminants (including glass, plastics, paint , wheels and metals)4 stage drying, using flooding technique, air blower and ultra plush drying towelsPaint thickness measured using electronic coating gaugeFull documentation of paint thickness's and conditionNotes taken of all problem areas from inspection and customers viewsWhere orange peel, fish eyes and deep scratches occurs, panels will be wet sand flatted by hand and/or machine.Paint thickness measured againWash stage repeated to rid all excess from flatting stagesDrying stages repeatedAll rubbers and non correction areas to be taped up in preparation for machine workPaint correction process to remove sanding or swirls by machineDoor shuts to corrected by machine (where possible)Plastics to be corrected by machinePaint refinement process, using finishing polishes, by machineWash stage repeated to rid any polish or dust collectedPaint Jewelling via machine polisher with glaze productsPaintwork cleansed with pre-wax treatment to aid the bonding of wax16 step finishing product application (customer's choice)Door, boot and bonnet shuts applied with finishing products (customer's choice)Chrome stainless steel and aluminium trim cleaned, polished and protectedWheels treated with 3 different sealing productsTyres scrubbed clean and dressed with rubber preserver (choice of)Windows cleaned and polished, inside and outDoor seals and rubbers treatedExterior glass treated with water repellent sealant treatmentEngine bay painted areas to be layered with more durable finishing productsEngine bay plastics dressed with durable matt/satin finish productsAny interior removable parts to be removed out of the car and stored safelyAny interior painted parts to be wiped down, clayed and correctedAll hard surfaces to be wiped down with natural products to rid and surface dust/dirtDry Vacuum interior to rid any larger loose dirtAll hard area folds, creases to be worked with various brushes with vacuum by its sideFoot mats are brushed down and steam cleaned to deep cleanse and deodoriseStarting with the headlining, shampoo and extract all fabric surfacesFully extend seat belts to clean and treatDress Plastic panels/areas with matt/satin finish productsTreat various metal finishes appropriatelyTreat and feed any wood trimTreat and feed rubber trimsAny leather items are subjected to 8 step cleanse and condition treatmentDress painted items with natural non harmful/smelling productRefit Loose interior items taken outProtect fabricBuff plastics to desired finishTime required - 55-60 hours