Stainless Steel Isolators
 In co-operation with Moeller Electric, Lasnek has developed and designed a range of stainless steel isolators suitable for installations requiring IP65 protection.Available in 3 individual versions, each isolator is manufactured using 304 - 1.4301 1.2mm / 18 gauge satin finish stainless steel. Ideally suited for direct installation where hygiene, aesthetics and corrosion are of primary concern each isolator is available complete in either 20, 25, 32, 63 or 100 Amp 3 pole ratings with the option of 6 pole configuration up to 63 Amps.Standard Box Standard Features:- Material: 304 - 1.4301 1.2mm / 18 gauge :- Finish: Satin 180 - 220 grit :- Mirror - Electro polish:- Protection: IP65 :- Construction: Fully welded c/w DIN rail :- Captive Screws @ earth connections:- Disconnect Switch: Fitted - Red and Yellow livery:- Mounting: Choice of plate or stand off brackets Shroud BoxStandard Features:- Material: 304 - 1.4301, 1.5mm / 16 gauge :- Finish: Satin 180 - 220 grit :- Protection: IP65 :- Construction: Shroud fully welded c/w DIN rail :- Disconnect Switch: Moeller Electric:- Handle: Rotary Red and Yellow , lockableOptions:- Disconnect Switch: Alternative manufacturers and sizes on request:- Material: 316L - 1.4404 Satin Finish:- Auxillary: Neutral / late make early breakShroud Box S15Standard Features:- Material: 304 - 1.4301, 1.5mm / 16 gauge :- Finish: Satin 180 - 220 grit :- Protection: IP65 :- Construction: Shroud fully welded c/w DIN rail:- Slope top: 15 Degree Fully Integral :- Disconnect Switch: Moeller Electric:- Handle: Rotary Red and Yellow , lockableOptions:- Disconnect Switch: Alternative manufacturers and sizes on request :- Material: 316L - 1.4404 Satin Finish:- Auxillary: Neutral / late make early break