Alumasc Ventilated System
The Alumasc Ventilated System is fully tested and has an effective life of between 25 & 60 years The system is detailed to provide a fully ventilated cavity as per TRADA recommendations, keeping the substrate dry and free from moisture All finishes used have high impact resistance, can be used in zones below 1.5m and pedestrian thoroughfares and are UV stable Can facilitate positive and negative wind loads of 2.0kPa. Calculations can be provided for areas of higher wind loads The system is fire resistant. Both the board and renders are class A1 to BS13501-1. Finishes range from B1 to DIN 4102-16 to B-s1, d0 to BS13501-1 Render carrier boards are easy to cut, moisture resistant, rodent resistant, mould resistant and non-hazardous Applications Suitable for timber framed construction New-build and/or fastrack building programmes Off-site manufacture Renders & Brick Slips ST Silkolitt Silicone Render, available with a rolled surface texture, in a wide range of colours M.R. Polymer Dashing Render, in a range of colours, with complementary aggregates Alumasc Acrylic Brick Slips can be selected from a standard range or bespoke slips can be manufactured to replicate existing substrates Installation & Maintenance Quick to install, compared to traditional construction methods and suitable for off-site manufacture Installed by a national network of Alumasc registered specialist contractors Requires minimal routine maintenance