Rising Bollard gets even stronger
The New Super Bull has a 10 mm thick 275 mm diametre outer case making the bollard one of the most robust units in the market. A special paint finish is also available to match coorporate colours. The motor used within the operator is the same used in the standard Bull, the additional weight being well within the capabilities of well known extremely reliable hydraulic motor. The pressure valves of the pump are preset so that the bollard can detect additional weight stopping the bollard if an obstruction is detected.The motor used within the operator is the same used in the standard Bull, the additional weight being well within the capabilities of this well known and extremely reliable hydraulic motor. The pressure valves of the pump are preset so that the bollard can detect additional weight stopping the bollard if an obstruction occurs. The motor is fully housed inside the bollard and comes complete with 10 metres of pre wired cable (this can always be extended), allowing the installer to mount the control panel remotely from the bollards. No need for separate hydraulic or pneumatic pumps which often cause noise and location problems often associated with other rising bollard systems. There are 10 high power red LED lights fitted into recessed holes around the top of the bollard to provide night time visibility even in the remotest of location. Sealed industrial limits for both fully open and fully closed are fitted at the top of the bollard, these limits can be combined with traffic lights to provide vehicles with definitive go signals. The Bollards can be operated by either the SEA gate 1 or Gate 2 panels and can be combined with an array of safety and control devices to make the system as flexible as needs dictate for any particular site. For more information on this innovative Rising Bollard, why not visit our web site at www.seaukltd.co.uk or call us on Tel no. 0121 706 9629