Chimney Cowl Bird Guard

27/05/2020

Supplied with Jubilee Clip and strap for fixingCowls are suitable for gas and solid fuel fires, please remember to state which one you require when purchasing Manufactured here in the UK using quality galvanized steel, the design has been modified to to fit different sized chimney pots.The Bird Guard is spot welded to the side prongs, this then gives more strength to the whole structure enabling the prongs to be pushed in or pulled out to accommodate the diameter of the chimney.Suitable for Chimney Pots with a diameter of between:    190mm to 280mm - 7.5" to 11"  Diameter of the top Cowl - 330mm/13 inchDepth of Bird Guard 135mm/ 5 1/4 inchHeight from base of prong to recess 100mm/4inch Total height is approx 270mm/10.5 inchUsed to prevent rain entering the chimney along with the protection of a Bird GuardSimply align the three prongs onto the outside of your chimney pot, the hat will then rest on the horizontal return edge at the top of the chimney.Suitable for Chimney Pots with a diameter of between:    190mm to 280mm - 7.5" to 11"  Diameter of the top Cowl - 330mm/13 inchDepth of Bird Guard 135mm/ 5 1/4 inchHeight from base of prong to recess 100mm/4inch Total height is approx 270mm/10.5 inchUsed to prevent rain entering the chimney along with the protection of a Bird GuardSimply align the three prongs onto the outside of your chimney pot, the hat will then rest on the horizontal return edge at the top of the chimney.BESPOKE SERVICE AVAILABLE.