What do I need to be an MOT test centre?
You need to make sure that you have the correct training and qualifications to become an MOT tester. Without the correct qualifications, you will not be approved by the Drivers and Vehicle Standards Agency (DVSA). You will also need to decide who should become the AEDM (Authorised Examiner Designated Manager). If you have one site, then this would need to be a director or sole trader of the business. This person would also need additional training to carry out the role of AEDM. You will also require premises that comply with the Drivers and Vehicle Standards Agency (DVSA) regulations. For example, you will need the height, length and width required for the classes of vehicles you would be testing. Also that the door and any openings to the MOT bay in and out meet the minimum width and height required. NOTE: You are strongly advised to have these important dimensions checked by a qualified competent person before deciding on any premises. Next you will need to think about the range of MOT equipment you would like to become an approved MOT test Centre. This may include... Vehicle lift, ramp or inspection pit Headlamp Beam Tester Roller Brake Tester (RBT) Emissions Tester Decelerometer Various hand-held tools Tool board and signage After this, you will need to choose a garage equipment supplier to supply and install your new MOT equipment. Ensure that your garage equipment supplier will support you and your business before and after your installation. For example, will your supplier carry out your DVSA VT01 application for you? Will they supply DVSA-accredited CAD drawings for you? And will they supply, install and train your staff to use the new MOT Equipment? At Concept Garage Equipment we are experts in MOT Bays and both the design and installation of MOT Test Centres. We can help you every step of the way. Call us today for free, no-obligation advice on your MOT Bay Tel: 0113 469 0572.