Road Blockers Avon RB680
RB680 Roadblockers comes in a variety of widths to suit specific site requirements, with a blocking segment height of 350mm.The Roadblockers are constructed from heavy welded steel section to provide sufficient strength to exceed British axle loads.The road blockers heavy duty durbar top plate is coated with safety markings, with removable access covers to enable efficient installation and servicing.The road blockers are operated by an hydraulic ram with the power unit (HPU) positioned locally within an externally rated cabinet. The road blockers mechanism is encased in a galvanised sheet steel enclosure and has access points for onward connection to ducting for hydraulic hoses and control cables.On installation the roadblockers entire enclosure is encased by concrete with construction being subject to site ground conditions.The road blockers power requirement is dependent upon the duty cycling requirement, number and size of blockers to be driven by the power pack.The road blockers come with a push-button control as standard, however it can be customised to interface with a wide range of access control equipment to suit specific customer requirements (available as options) and any configuration including (but not limited to) inductive loop systems, card readers, communication equipment and manned guard emergency systems can be accommodated.For safety reasons pedestrians, cyclists and motorcycles are advised not to use a blocker controlled roadway, additional safety measures can be incorporated into the road blocker system if required.Where the Roadblockers control point is remote from the installation, we strongly recommend the fitting of a recordable CCTV system, traffic lights and safety inductive loop systems.