We highly advise our customers to exclusively purchase Belzona products from authorized Belzona distributors. Counterfeit materials are unlikely to meet Belzona’s stringent performance and safety standards. Using such materials for repairs or asset protection may result in service failures and pose significant health risks to users. https://www.belzona.com/en/about/disfinder.aspx

To ensure an effective molecular weld, only apply the 2-part epoxy, Belzona 1111 (Super Metal), to clean, firm, dry, and well-roughened surfaces. To achieve this, firstly clear away any loose contamination and use Belzona 9111 (Cleaner/Degreaser) to clean and degrease the surface. Following this, roughen the surface by blast cleaning, deeply scoring, or grinding. Degrease the surface again, allowing the surface to dry before combining the reactive components. To do this, transfer the required amount of Base and Solidifier components onto the Belzona Working Surface, ensuring the correct mixing ratio is followed. Mix thoroughly to achieve a uniform material free of any streakiness. Next, apply the Belzona 1111 (Super Metal) directly onto the prepared surface with the plastic applicator or spatula provided. Finally, mixing tools should be cleaned immediately after use with Belzona 9111 or any other effective solvent, e.g., Methyl Ethyl Ketone (MEK). For more information, read the Instructions for Use (IFU)