CONTINUOUS AIR QUALITY / STACK MONITORING, FILTER BAG FAIL SENSOR
To ensure that you have clean, high quality air returned back into the workplace, from dust & fume extraction systems and saving energy / heat costs which would otherwise be lost, R&B Industrial have developed low cost particulate & Air Quality monitoring & data logging systems. The systems continously monitor particulate concentrations in a duct; ie in a stack to atmosphere or return air duct back into the workplace from a dust or fume extraction / filtration system. Continuous dust/ particulate monitoring, alarming and data logging of emissions can provide proof of air quality, helping to ensure a safer & cleaner workplace. The HSE are also concerned by the increase in occupational asthma and are scrutinizing ventilation (LEV) systems and causes of dust/fumes in the workplace. Return air from filters back into the place of work, can be a cause of increased respirable dust levels (especially if incorrect filters are fitted, or effective monitoring & maintenance is not performed), increasing the risk of occupational asthma. R&B LOW COST particulate / stack monitoring systems generally consist of: · A control unit with/without data logger (for up-to two stacks). For a greater number of stacks a centralised PC can be used. · By performing a calibration process the output signal can be displayed in customer units ie mg/m³, or g/s. A number of very cost effective particulate monitoring systems have been developed by R&B Industrial to cover a wide range of industrial applications.