BSU3 - 125A battery Support Unit
DIAGNOSTICS, RE-PROGRAMMING, ABS BRAKE BLEEDING BSU3 provides a selectable stable voltage and up to 125A (100A @ 14.8V) of fully regulated power to prevent loss of battery charge and damage to vehicle components. BSU3 can be used with any 12v automotive battery. When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain. Can be used in the showroom to maintain the battery charge while power consuming accessories are being demonstrated without fear of power loss. Reverse polarity protection. Supplied with 5M IEC power lead. FEATURES BSU3 provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state. Output voltage can be selected from one of three preset levels: 12.7V, 13.8V, 14.8V During diagnostic or programming operations, the vehicle's systems are operating solely from the battery. Maintaining battery charge during this process is critical. The status of BSU3 is indicated simply by three LED's - POWER, POLARITY, DEMAND. When all 3 are illuminated, BSU3 is supporting the battery. Designed to be wall or ramp mounted the BSU3 has been designed to meet the needs of the high power consuming vehicle. A 24V 70A version is also available to special order. SPECIFICATION Input 90 - 264 VAC Output 12.7 - 14.8V up to 125A continuous Weight 3.5 Kg Size 300 x 184 x 124 mm