Series OLS10KD
The Series OLS10KD range of 10kW high voltage power supplies recognises the requirement for high stability and very low ripple over a wide range of output voltages. This is achieved by combining the high power, 10kW supply with a low power, 1kW supply in the same chassis. The outputs of these are coupled together so that either can be used. For high voltages, usually above 10% of the maximum, the High Energy (HE) supply is used; for voltages below 10% the Low Energy (LE) supply is used. The LE supply has superior ripple and regulation at the lower voltages and maintains this down to a few hundred Volts or less. The Series OLS10KD meets the exacting requirements found in electron and ion beam systems, ion implantation and X-ray systems. Designed using the latest power switching IGBTs to ensure efficient and reliable operation over the full operating range, the Series OLS10KD will give exemplary performance in the most severe of electrical environments. The Series OLS10KD achieves an exceptionally high packing density for high voltage power supplies of this power level, giving 169W/Liter, 2.7W/inch3.