New A1-Series High Security Electro Mechanical Mortice Lock
Why choose an A1 lock ? 1. Very high resistance against any type of aggression.- The locking components are mounted on a 10mm thick solid casted stainless steel baseplate. - The locking components are hardened steel casted parts (HRC45). - The components will lock even more when pressure is applied to the bolt. - The bolt is ejected 20mm. - The bolt has an anti-saw pin. - The bolt withstands very high-pressure (non-destructive) both lateral and vertical. 2. Unlocking is still possible even when lateral pressure is applied. 3. The lock can be installed in the door frame on the side or above the door and in the door vertically. 4. The lock can be used with Din left, Din right and 180 degree doors. 5. The striker plate is a very solid casted piece with a striker cup, which makes the bolt inaccessable. 6. Both Euro profile cylinders and Swiss cylinders can be used for mechanical override. 7. Very fast locking or unlocking action because of strong solenoid. 8 .Available in Fail Secure (locked without power) and Fail Safe (unlocked without power). 9. Bolt and door detection monitoring built into the lock. 10. High security escutcheon available.